CURSO/TALLER PRÁCTICO

"Herramientas GESTAR  para la ingeniería hidráulica y energética de redes colectivas de riego, presurizadas.

Aplicaciones al diseño y gestión óptima”

Fecha: 19 al 21 de Noviembre 2013

Lugar:

Departamento de Geología y Minas e Ingeniería Civil

Universidad Técnica Particular de Loja

LOJA (ECUADOR)

Dirigido a:

Proyectistas de Ingenierías, Técnicos de las Administraciones y Empresas Públicas, Técnicos de Obra, Gestores de Comunidades de Regantes. Estudiantes Pregrado, Master y Doctorado. Docentes e investigadores

Durante los próximos días19 a 21 de noviembre de 2013 tendrá lugar en la Universidad Técnica Particular de Loja (Ecuador) un curso de iniciación que faculta para la explotación sistemática de las herramientas GESTAR para el diseño y gestión hidráulicas y energética de sistemas de riego presurizado.

Inscripción:

Ing. Carmen Mireya Lapo Pauta

DEPARTAMENTO DE GEOLOGIA Y MINAS E INGENIERIA CIVIL
SECCION RECURSOS HIDRICOS
UTPL - 072570275 - ext: 2511

cmlapo@utpl.edu.ec
Loja - Ecuador

A lo largo de las dos próximas semanas tendrán lugar sendos cursos que capacitarán para la  explotación de herramientas de gestión que permiten la operación sin disfunciones de redes de riego  presurizada y el ahorro de hasta en 35% de los costes energéticos en sistemas alimentados por bombeo directo.

Día 23 de Octubre 2013, Reducción de Costes Energéticos y Optimización de Programación de Riegos en la gestión de Comunidades de Regantes mediante el programa GESTAR, organizado por FENACORE, en horario de 10:00 a 18:00, en Madrid (España).

Día 6 de Noviembre 2013, Herraminets para la Gestión Hidráulica y Energética de CCRR, organizado por el CENTER, en horario de 09:00a 17:00, en Madrid (España).

El curso del día 23 de octubre está organizado por Federación Nacional de Comunidades de Regantes (FENACORE) se dirige a personal de las CCRR relacionados con la gestión hidráulica y energética.

Lugar: Sede FENACORE  (Paseo de la Habana, 26 – 2º - oficina 2 - 28036 Madrid)

Para inscripción contactar fenacore@fenacore.org

El curso del día 6 de Noviembre 2013, organizado por el Centro Nacional de Tecnología del Regadío adscrito a la Subdirección General de Regadíos y Economía del Agua del Ministerio de Agricultura. Alimentación y Medio Ambiente (CENTER), se dirige a técnicos de administraciones y empresas relacionados con la gestión de sistemas de riego y el ahorro de costes energéticos.

Lugar. Sede CENTER (Camino de la Vega s/n San Fernando de Henares, 28830 Madrid)

Para inscripción contactar: info@center.es

The GESTAR team has been committed to organize in the Pirineos Campus of the Universidad Internacional Menendez Pelayo  (UIMP) a 3 day meeting in the subject;

Technologies and Strategies for Energy Saving in Irrigation

The seminar will take place from 18 to 20 September 2013, in the Escuela Politécnica Superior de Huesca (Spain) bringing relevant national and international speakers, addressing to irrigation engineering  professionals,  technological and  and civil works companies, WUA, public servers, river basin managers,  producers, researchers and students.

The conferences will present the latest innovations in technology and management procedures that can provide energy and cost savings in modernized irrigation systems pressurized by pumping stations with a remarkable energy consume.

The brochure with activities program is here  (resgistered users).

Inscription ON-LINE (UIMP web site)

UIMP is a Spanish internationally renowned institution that organize seminars and meetings dealing with the most challenging issues, providing a framework for reflection  and dissemination of knowledge at the highest level.  Conferences are address to an multilevel audience of professionals,  researchers, companies, users and stakeholders of the administration.
 

The next June the 5, 6, 12 and 13th, from 16:00 to 18:00, will be held at the Polytechnic School of Huesca, (Universidad de Zaragoza, Spain) an Advanced Course on GESTAR packaged, developed as practical training workshop, organized by the Association of Agriculture Engineers of Aragon, Navarra and the Basque Country.

This advanced course is aimed to users with at least a previous basic level knowledge of  "GESTAR", and the objective is to adquire further skills in the tools for the design and management of irrigation systems, with emphasis on energy and hydraulic analysis. Applications for design and efficient management networks is introduced altogether with optimum irrigation scheduling for minimum energy consumption.

The course is open to non collegiate and reserves a limited number of places for students in the final year of engineering careers. The number of places is limited to 20.

Registration and enrollment is handled entirely through this link: Advanced Course GESTAR. Advanced Course GESTAR , Colllege of Agricultural Engineering of Aragón, Navarra and Basque Country.

In case you could not attend this course, you can send an e-mail to info@gestarcad.com, exposing your preferences for future new edition.

Date: Wednesday, May 8th, 2013

Time: 11:30

Location: Polytechnic School of Huesca.

Cuarte Road, s / n,

22071 Huesca (Spain)  (See map)

The consortium formed by the companies REGABERR and SARGA, and the Universidad de Zaragozaa, has the honour to invite you to the presentation of the RTDI  project

DRIP IRRIGATION TECHNOLOGIES AND TOOLS FOR SAVING WATER AND ENERGY IN EXTENSIVE CROPS

recently approved in the call INNPACTO 2012 NATIONAL PLAN for RTDI Ministry of Economy and Competitiveness, which will take place next Wednesday May the  8th, 2013, in the Huesca Polytehcnic School

The event will present the project most relevant content and objectives, and will provide an hermes handbags opportunity for attendees to join the network of observers.

Downoad brouchure

Reservations. info@gestarcad.com

The next March the 15th 2013, will take place in the Mediterranean Agronomic Institute of Bari (Italy), IAMB, a seminar with the title: GESTAR 2010 Engineering Tools  for the Design and Management of Pressurized Irrigation Networks. It will introduce to students and researchers from prestigious IAMB in the fundamentals and latest developments of the software application  GESTAR / TELEGESTAR. The seminar will be dictated by Dr. Ricardo Aliod, GESTAR team coordinator.

This event is part of the diffusion and technology transfer activities on the INNPACTO project titled: Advanced Technologies for Energy Efficiency in the Engineering and Management of Irrigation Systems, supported  by the Spanish Ministry of Economy and Competitiveness.

The affinity of the fields of interest of both replica watches uk RDTI groups, involved in design, modeling of irrigation networks, and energy efficiency in such systems, will allow the further cooperation and exchanges of technologies and experiences.

La Universidad de Zaragoza ha publicado para el Curso 2013-2014 una nueva edición de la "Convocatoria de Ayudas de Movilidad para Latinoamericanos. Estudios de Doctorado. Universidad de Zaragoza 2013-2014"

El plazo de presentación de solicitudes finalizará el próximo día 19 de abril de 2013. Las condiciones para la presentación de candidaturas, asi como la descripción de la estructura del Programa y el modelo de solicitud, pueden obtenerse en la página web de la Universidad de Zaragoza: Ayudas Movilidad Latinoamericanos:  

Este Programa de ayudas tuvo su inicio en el curso 2001/2002 y se enmarca en la política de impulso a la cooperación académica y científica entre la Universidad de Zaragoza y las Universidades Latinoamericanas.

Para acceder al Programa de Doctorado en su periodo de investigación será necesario estar en posesión de un título oficial de Máster Universitario, u otro del mismo nivel expedido por una institución EEES o Master  acreditable (ver mas abajo) y tener una  vinculación laboral permanente con una universidad o institución de educación superior o con otra administración pública del país donde resida de los países que forman la Comunidad Iberoamericana de Naciones, de manera  que pueda beneficiarse de los conocimientos adquiridos por el solicitante cuando regrese a su país de origen. Dicha vinculación laboral debe mantenerse al regreso del doctor a país.

mbt zapatos

Si como potencial candidato/a  reúne todos  los requisitos y que deseen concursar a esta convocatoria desarrollando su tesis doctoral en el seno del equipo I+D+i  GESTAR, contáctenoas adjuntado su CV a   info@gestarcad.com

Recently it has took place in the headquarters of INTIA ( Navarra´s  Institute for  Agrifood Technology and Infrastructures) in Villaba (Pamplona) a new training event  about GESTAR. This conference is intended for technicians of the institute specialized in the design of farm irrigation facilities (solid state sprinkler and drip irrigation).

The aim of the day was to enable the evaluation of new tools being implemented in GESTAR  for plot irrigation design, that will be available soon,  and  to establish a collaboration in the debugging task. INTIA is a public company under the Department of Rural Development and Environment, of the Government of Navarre, who among other duties, serves for  irrigation  development  and modernization  in the of Navarre´s  territory.

The coming days 5th and 6th February 2013, will take place in Madrid (Spain), a training course in the use of tools GESTAR for the design and management of pressurized irrigation systems with emphasis in  modelling and optimization of water and energy use

This introductory two days course is exclusivelly intended to SEIASA staff.

SEIASA is the instrumental company of the Ministry of Agriculture, Food and Environment in Spain, in charge of modernization and consolidation of irrigation  in the National Irrigation Plan.

SEIASA, a  company operating all over the national territory, has been regularly user of GESTAR in its various regional offices as a design tool for large projects under their mandates. As part of the services associated to a recent acquisition of a number of new licenses, it is included this course, that will introduce  to a selection of SEIASA´s technicians the most important GESTAR resources.

GESTAR has a sophisticated but user friendly set of tools and modules that allow the optimal configuration and regulation of pumping stations, and supplies subsequent detailed energy analysis. It is provided through innovative modeling and optimization algorithms achieving reliable, robust and simple engineering strategies.

In order to compare the performance of GESTAR 2010 versus EPANET2, it has been developed a Technical Note " Is EPANET2 an adequate tool for energy and hydraulic analysis in irrigation systems? Comparison with GESTAR 2010" (In spanish language), which is available in pdf format in the web document´s downloads section.

Remember you must to have logged on this website with your user name and password in order to download files. Create Account.

That review will be useful to understand key points for pumping system design, and reducing energy costs. It will explain why GESTAR 2010 contains the best technical resources available in this particular field of  design and management engineering for irrigation networks.